1.10.3获取眼镜客户端资源监控数据

**1.10.3获取眼镜客户端资源监控数据**

| 请求方式  | GET  |
| ------------ | ------------ |
| **请求URL**  | http: // {LarkXR3.2管理服务器IP}:8181/taskInfo/getPerformanceMeasure|
| **参考样例 ** | http: //192.168.1.11:8181/taskInfo/getPerformanceMeasure|

**升级说明**
- 接口地址由“/watch/getPerformanceDatas”改为“/taskInfo/getPerformanceMeasure”，端口由默认的8282变为8181

**参考样例**
```
说明：adminKey,timestamp,signature这三个参数有两种方式传递
一种是以参数的形式传递，例如：http://192.168.1.11:8181/taskInfo/getPerformanceMeasure?adminKey=603299366654678855& timestamp=1585729005673&signature=4C1BFE264A113A99C526BF5565EEBE642792A0B6
另一种是在OkHttp请求的header中传递，例如  :
Request.Builder builder = new Request.Builder().
                addHeader("adminKey", 603299366654678855)
                .addHeader("timestamp", "1585729005673")
                .addHeader("signature", "4C1BFE264A113A99C526BF5565EEBE642792A0B6")
                .url("http://192.168.1.11:8181/taskInfo/getPerformanceMeasure");
```
|名称   | 类型  | 是否必须  |描述|
| ------------ | ------------ | ------------ |------------ |
| taskId  |  String |  是 |任务Id|
| adminKey  | String  |  是 | 参见1.3.1 |
| timestamp  | Long  |  是 | 参见1.3.1 |
| signature  | String  |  是 | 参见1.3.1 |
返回结果：

|名称   | 类型  | 是否必须  |  描述 |
| ------------ | ------------ | ------------ | ------------ |
|code | Integer  | 是  | 返回状态  |
|message  | String | 否  |返回消息  |
| result  | String  | 否  | Code=1000的时候，Api返回的数据 |
| id  | String  | 否  |资源数据Id |
| taskId  | String  | 否  |任务Id  |
| clientRenderLatency  | float  |否  |客户端渲染时延 单位：ms |
| decodeLatency  | float  | 否  |解码时延 单位：ms|
| transportLatency  | float  |否  |传输时延 单位：ms |
| encodeLatency  | float  |否  |编码时延 单位：ms |
| serverRenderLatency1  | float  |否  |服务端渲染时延1 单位：ms |
| serverRenderLatency2  | float  |否  |服务端渲染时延2 单位：ms |
| cmdUploadLatency  | float  |否  |指令上传时延 单位：ms |
| totalLatency  | float  |否  |总时延 单位：ms |
| feelLatency  | float  |否  |感知时延 单位：ms |
| blackEdgeDegree  | float  |否  |黑边度数 单位：° |
| clientFps  | float  |否  |客户端FPS  |
| serverFps  | float  |否  |服务端FPS |
| rtt  | float  |否  |网络延时 单位：ms |
| packetRate  | float  |否  |包发送速率 |
| totalSent  | float  |否  |发送包的总个数|
| sentRate  | float  |否  |发送速率 Mbps |
| frameRate  | float  |否  |码率 |
| resolutionRatio  | float  |否  |客户端分辨率 |
| otherLatency  | float  |否  |其他时延时延 单位：ms |
| packetsLostLatency  | float  |否  |丢包率 |

**返回示例**

``` 
{
    "code": 1000, 
    "message": "操作成功", 
    "result": [
        {
            "id": "732282282802413568", 
            "taskId": "732282274455748608", 
            "clientRenderLatency": 3.57, 
            "decodeLatency": 15.9, 
            "transportLatency": 3.96, 
            "encodeLatency": 11.84, 
            "serverRenderLatency1": 0.12, 
            "serverRenderLatency2": 0, 
            "cmdUploadLatency": 0, 
            "totalLatency": 54.65, 
            "feelLatency": 0, 
            "blackEdgeDegree": 0.54, 
            "clientFps": 70, 
            "serverFps": 24, 
            "rtt": 1, 
            "packetRate": 144, 
            "packetsLostInSecond": 0, 
            "totalSent": 0, 
            "sentRate": 0, 
            "frameRate": 23, 
            "resolutionRatio": "2560x1440", 
            "createDate": "2020-07-13 17:08:21", 
            "otherLatency": 19.38, 
            "packetsLostLatency": 0, 
        }
    ]
}

```